Flum vapes are known for their simple, reliable designs. Most of the vapes made by Flum have no options or settings for you to worry about, which means that all you need to do is remove your device from the package and start puffing on it. It’s nothing but worry-free satisfaction – unless, of course, your Flum vape isn’t working.
If you have a Flum vape that’s not hitting or not charging, you might feel a sense of shock or surprisebecause there’s nothing on the vape that you can adjust or change. The good news, though, is that the simplicity of Flum vapes means that they’re generally very easy to troubleshoot.
In this guide, we’ll explain exactly what you need to do to get your vape working and get back to enjoying those delicious Flum flavors.
Contents
Evaluate the Problem
If your Flum vape isn’t working, the first thing that you need to do is evaluate the type of problem you’re having and determine whether it’s fixable.
- Flum Vape is Blinking:If your Flum vape blinks when you try to hit it, the device is damaged, or the battery is dead. If device started blinking because you dropped it on a hard surface or in water, it’s most likely a lost cause. If it started blinking after previously working normally, the battery is probably dead. Connect the device to your computer with a USB cable to charge the battery.
- Flum Vape Tastes Burnt:if your Flum vape tastes burnt every time you hit it, this is another problem that’s not fixable because it means that your device is empty. When the e-liquid container is completely dry, the coil will begin to overheat because it’s no longer supplied with vape juice. That’s why you taste a burnt flavor. Like most disposable vapes, Flum vapes aren’t designed to be refilled. When your device reaches this point, it’s time to replace it.
- Flum Vape Isn’t Hitting:If you have a newFlum vape that isn’t hitting, the problem is probably fixable. Scroll down to see what you should do next.
- Flum Vape Isn’t Charging: If your Flum vape isn’t lighting up when you connect it to your computer, the problem is probably fixable. Scroll down to see what you should do next.
New Flum Vape Isn’t Hitting
If you have a brand-new Flum vape that isn’t hitting, the problem has three potential causes.
- You haven’t preparedthe device fully for use. You’ll find a silicone plug in the mouthpiece at the top of your Flum vape, and you might find a sticker covering the bottom airflow vent as well. You’ll need to remove and discard both of those. If your Flum vape wasn’t working because you couldn’t draw air through it, it should work now.
- The airflow sensor isn’t working properly.The sensor might not be as sensitive as it should be. It’s also possible that the sensor is stuck because the e-liquid container has leaked. Try taking a few quick, firm puffs to see if you can get the sensor working. If that doesn’t work, try blowing firmly through the Flum vape instead. You can also try tapping the device against your hand a few times. If you’re able to get the puff sensor unstuck, your Flum vape should start working normally.
- The battery is dead. Although this situation should be rare, it’s possible that the battery for your Flum vape may have self-discharged itself while the device was still in the package. You can check the battery by connecting the device to your computer. If the light turns on, the battery is now charging. Wait about a half hour, and the device will be ready to use. If the light doesn’t turn on, continue to the next section to troubleshoot that issue.
Flum Vape Isn’t Charging
Unless the battery is completely charged already, your Flum vape should always light up when you connect it to a power source with a USB cable. If it doesn’t light up, you have a charging issue. Here’s how you should handle it.
- Use a different USB cable.In most cases, this is all that you should ever have to do with a Flum vape that isn’t charging. The reason why the cable is usually the cause of a charging issue with a vaping device is because USB cables often fray internally after they’ve been connected and disconnected daily over a long period of time. If the cable that you’re trying to use no longer works properly, replacing the cable will resolve the problem.
- Connect the Flum vape to your computer. A Flum vape should charge properly if you use a wall adapter with a power output of 5 volts, 1 amp. It may not charge correctly with a high-speed charger like the one included with your smartphone. Your computer, however, is always the most reliable power source – so if you’re trying to charge your Flum vape through a wall adapter, try moving it to your computer.
- Clean the charging port.Your Flum vape can’t charge if power can’t transfer to the battery through the contacts in the charging port. Use a flashlight to check the port for contaminants like dust and pocket lint. If the port is dirty, use a toothpick or some compressed air to clean it. Once you’ve removed whatever is blocking the port, your Flum vape should start charging normally.
What to Do if You Can’t Fix Your Flum Vape
We hope that you’ve been successful in fixing your Flum vape by following the steps in this article. However, it’s possible – though very rare – to buy a vape that’s truly non-functional and doesn’t work at all out of the box. If you have a brand-new Flum vape that isn’t working, a good vape shop should have no problem taking it back. They’ll provide you with a new vape and will probably want you to confirm that it works before leaving the store. If the shop isn’t willing to accept the return, you might want to consider taking your business elsewhere.
